Shaft attachment and adjustment

1.Slide the Shaft Receiver into the attachment point at the end of the Pair Splinter Bar. Replace the bolt and tighten it enough to secure the Shaft Receiver in place, but not so tight as to restrict the shaft from moving up or down. Periodically check the bolt to ensure proper tightness.

2.To adjust the shaft, loosen the Shaft Receiver Tension Bolt located on the underside of the Shaft Receiver.

3.Slide shaft into Shaft Receiver and adjust length and rotate the shaft to fit your horse. Tighten bolt in Shaft Receiver to securely hold shaft in place. Check bolt periodically to ensure that bolt is properly tightened.


<< Go back >>