Great quality sturdy natural leather carriage harness for single
and pair of horses and ponies; pleasure and marathon driving. This
carriage harness is available in natural leather (HA1),
cherry (HA2) or black (HA3) colour
(breeching available). Fittings - stainless steel, brass or gilded. See
some harness
parts.
Here are some examples of our quality carriage
harness (breeching available):
See some horse harness
parts.
Shetland Pony harness 1,05m (10.3h)
Pony harness 1,1 - 1,5m (10.8 - 14.8h)
Horse harness 1,5 - 1,8m (14.8 - 17.7h)
- HOW TO MEASURE YOUR HORSE/PONY - HARNESS MEASUREMENT
CHART
- BEST MEASUREMENTS OCCUR IF YOU HAVE A WELL-FITTING HARNESS
TO MEASURE AND COMPARE WITH HORSE. USE A SOFT QUILTER'S
"FABRIC" TAPE MEASURE.
- PROVIDE ALL MEASUREMENTS IN CM OR INCHES.
A. Corner of mouth, over poll, to corner
of mouth and from corner of mouth up to ear on one side.
B. Browband - total length from end to end.
C. Noseband
D. Girth - all way around where saddle sits
E. Backband - back of saddle to base of tail
F. Hip strap - over loin to top of breeching
G. Breeching - point of hip around rump to point of hip
H. Breastplate - from center of saddle
skirt around chest to center of skirt on other side.
- We will use this measurement, adjusting for single or
pair, depending upon your order.
-
